How To Set Up A Dust Collection System

If you are spending a lot of time in your woodworking shop, you know how important it is to collect the sawdust. A clean space is a healthy space. While a shop vac can be very useful, you lot may want to consider an automated dust drove system.

There are many different types bachelor, but the installation is pretty much the same. Be sure to follow the enclosed instructions very carefully. Here are the nuts of installing your grit collection arrangement.

Find the System All-time for Your Shop

Bigger and more expensive is not always better. Brand certain the system will fit in your space and that information technology volition run effectively with your power supply. Some systems may crave more power than your home will provide, or a defended higher output outlet.

You besides don't desire the organization to accept upwards too much infinite in the store. If you have limited infinite or are running several unlike machines, you should go along that in heed.

Bank check to see that the dust drove system will exist able to function in your workshop. Space, power, and overall configuration are all of import considerations.  If you get it correct, yous'll be thrilled to take dust collection as a cadre part of your shop.

Check the System

One time yous have decided on the organization yous want, bought it, and gotten it dwelling (or to your shop), take everything out and examine it. Make sure all the pieces are there and put all the paperwork somewhere you tin can discover it.

That means the receipt, the warranty, and the instructions. But in case y'all observe out that the system won't work, or pieces are missing, you need to be able to return information technology or have proof of purchase.

And equally yous are unpacking - check for dents.  Some large pieces tin get dents which may make assembly hard.  If you buy from a reputable source this won't exist an result but it'south best to identify it before you start putting the system together.

Decide Where It Will Go

Depending on the system you have, it may need to exist mounted on the wall, it may exist freestanding, or it may exist able to be outside. A grit collection unit stored and protected outside volition cut downward on the racket and proceed your shop floor clear.

Mounting

If you are mounting the system, make up one's mind where it will function best. Yous demand to identify information technology close to an outlet. If you are mounting information technology on a finished wall, use a stud detector to notice the studs within the wall.

You will demand to make wooden cleats that will fit the size of your dust collector. Exist sure to measure everything on the wall, mark everything conspicuously and follow the sometime carpenters' rule: Measure Twice, Cut One time.

One time you lot have the cleats in place, attach the mounting hardware, if yous have them, or use lag bolts for your mounting. Before you mount the unit, consider some blazon of sound or vibration dampening materials.

Attaching the Canister and Filter

Once y'all have the grit collector in place, tighten the lag bolts to secure the system. Then, you can adhere the canister.

Commencement, utilize the foam tape that is included and wrap it effectually the outlet port. So, attach the flange and line it upwards with the holes on the canister filter. Apply the bolts that are supplied with the system to tighten the canister filter.

Next, attach the agitator arm, making certain it can move and rotate in both directions. Once that is on, wrap it with foam tape, and then, fit the drove bag in place at the bottom or wherever it is meant to fit and seal the top with the foam tape.

Attaching the Hoses

Once again, depending on the size and type of dust collection organization you have, attach the Y inlet to the drove unit and secure the smash units on each inlet. Then connect the hoses and the clamps.

Here you can commencement to customise your unit of measurement and attachments. You may desire to install ceiling hooks to keep hoses slightly elevated, rather than on the floor. If you are attaching several pieces of machinery, yous will demand to move them effectually to make sure they can all fit in the space.  If your dust collector has enough inlets for your major machinery you tin can run a hose to each car, if not, you lot might consider setting up some branching solutions that make it quick and easy to switch which hose is getting the suction.

If you don't run hoses to each machine and yous are planning to connect them when in use, and then yous tin can also add together a docking port on the wall that will hold the hoses in place. You lot don't want them getting in the manner or damaged. They may become defenseless on other pieces of equipment or snag y'all or just be in the style.

You will also need a infinite to hang the hoses when non in utilize. A few mounted boards with hooks or clamps will help go along the attachments clean and away from impairment. It is of import to make space for this earlier you start mounting the dust collection system.

Setting Upward Shop

To attach the hoses of the dust drove system to your tools, you lot may demand to rearrange your shop. Information technology is easier to motility the machines than the dust collection system. Therefore, information technology is of import to option the perfect place for it.

Move the equipment so you can attach them directly to the system. Move your other smaller tools, so they are handy and easy to reach. In one case you are finished, your shop will look and run much more efficiently.

Tips

If you lot tin can identify the dust collection system outside or on the other side of the wall, it volition get in much cleaner and take up less space. Of course, you will still need to rearrange your equipment to reach the system.

Finding a organisation that comes with a remote control will make work much easier. Well-nigh automatic dust collection systems practice accept remotes, but it is a skillful idea to check.

The remote saves y'all from having to stop working and walk to the unit to turn it or off.

Brand sure the unit you get can accommodate more than 1 motorcar if yous program on using it for that. It is much easier to outset with more options in the showtime, even if you don't demand it right abroad.

About grit collection systems are easy enough to install and apply. They make your workshop much cleaner and streamline. There are plenty to choose from, so find the 1 that will work best for you lot.

Source: https://woodworkology.com/installing-and-using-a-dust-collection-system/

Share this post